TravelScoot 25.2V Battery (7S4P / 7S5P)

TravelScoot 25.2V lithium-ion battery – repair and cell replacement

This service is for TravelScoot mobility scooters with a 25.2V lithium-ion battery in the 7S5P housing format. You send us your existing battery; before work begins, we inspect the housing, cables, AMP connector, contacts and battery management system (BMS).

The original label identifies TravelScoot, Panasonic Battery, 7S5P, 25.2V, 11.75Ah and UN38.3. Replacing cells in the selected configuration does not replace the inspection of the existing BMS and connections.

Choose your capacity

• 14Ah / 352.8Wh (7S4P): 28 cells of 3500mAh, with 7 cells in series and 4 parallel groups. Calculation: 25.2V × 14Ah = 352.8Wh.
• 17.5Ah / 441Wh (7S5P): 35 cells of 3500mAh, with 7 cells in series and 5 parallel groups. Calculation: 25.2V × 17.5Ah = 441Wh.

Both options retain the 25.2V nominal voltage. Higher capacity increases the energy reserve and may increase range; it does not increase scooter speed or motor power. Actual range depends on rider weight, surface, gradients, temperature and use.

Compatibility check

This offer is intended only for the matching TravelScoot construction. Before ordering, compare voltage, housing, cables, connector type and contact positions with your battery. If unsure, send us photos of the label and connections. Final technical suitability is confirmed on the battery received.

Batteries for mobility scooters and powered wheelchairs

Many powered wheelchairs and mobility scooters use a 24V system, often made from two 12V AGM or gel lead-acid batteries connected in series. Lightweight travel scooters frequently use compact lithium-ion batteries with their own housing, BMS and connector, such as this 25.2V TravelScoot battery. A battery must therefore not be selected by Ah or Wh alone: voltage, chemistry, charger, connector and electronics must match.

Safety, charging and transport

Use only a charger suitable for the system and protect the connector from short circuits, moisture and mechanical damage. A UN38.3 marking on an original battery is not automatic proof for a battery repaired later. Air travel and shipping are subject to the rules of the individual airline or carrier; always confirm them in advance and use documentation for the battery actually being used.

How the battery repair works

1. You choose the capacity and send in your TravelScoot battery.
2. We inspect the housing, cell assembly, BMS, cables and connectors.
3. We renew the cells in the selected configuration and carry out function, charge and discharge tests.
4. After successful inspection, we return your battery.

Important note

Cell replacement does not repair a fault in the BMS, charger, cables or scooter. If additional work is required or repair is not technically appropriate, we will contact you before further work.